Support Bracket Screw
d) Remove the two 5/16˝ hex-head screws
from the burner bracket.
e) Pull the burner assembly forward, un-
hook the bracket tabs from the chas-
sis slots, and remove the assembly.
Burner Bracket Screws
Ignitor
Burner Assembly
Flame Sensor
Connector
Burner Harness
Connector
Coils
7.
To remove the coils from the burner
assembly:
a) Remove the burner assembly (see step
6).
b) Disconnect the 2-pin and 3-pin con-
nectors from the coil terminals.
c) Remove the two screws from the brack-
et, and lift the two coils off their cores.
4-17
2 Coils