Table of Contents
Advertisement
User's Manual
Power indicators
As shown in the above table, the Battery, Slim Select Bay, DC IN and Power
indicators on the system indicator alert you to the computer's operating capability
and battery charge status.
Battery indicators
Check the Battery indicator to determine the status of the main battery and the
Slim Select Bay indicator to determine the status of the secondary battery. The
following indicator lights indicate the battery status:
Flashing orange
Orange
Green
No light
NOTE: If the battery becomes too hot while it is being charged, the
charge will stop and the battery indicator will go out. When the battery's
temperature falls to a normal range, charge will resume. This occurs
whether the computer's power is on or off.
DC IN indicator
Check the DC IN indicator to determine the power status with the AC adaptor
connected:
Green
Flashing orange
No light
Power indicator
Check the Power indicator to determine the power status:
6-4
The battery charge is low. The AC adaptor must be
connected to recharge the battery.
Indicates the AC adaptor is connected and charging the
battery.
Indicates the AC adaptor is connected and the battery is
fully charged.
Under any other conditions, the indicator does not light.
Indicates the AC adaptor is connected and supplying
proper power to the computer.
Indicates a problem with the power supply. Plug the AC
adaptor into another outlet. If it still does not operate
properly, see your dealer.
Under any other conditions, the indicator does not light.
Advertisement
Table of Contents
