Toshiba PS630U-G205HV User Manual page 37

Hibernation
Standby
System automatic
Standby/Hibernation
Low battery
automatic hibernation
Keypad overlay
Power on password
Instant security
Intelligent
power supply
Battery save mode
This feature lets you turn off the power without exiting
from your software. The contents of main memory is saved
to the hard disk, when you turn on the power again, you
can continue working right where you left off. Refer to the
Turning off the power
Started, for details.
If you have to interrupt your work, you can turn off the
power without exiting from your software. Data is main-
tained in the computer's main memory. When you turn on
the power again, you can continue working right where
you left off.
This feature automatically shuts down the system in
standby mode or Hibernation mode when there is no input
or hardware access for a time specified. You can specify the
time and select either System Standby or System Hibernate
in the System standby and System hibernate item of the
Power Save Mode window in TOSHIBA Power Saver.
When battery power is exhausted to the point that
computer operation cannot be continued, the system
automatically enters Hibernation and shuts down. You can
specify the setting in the Battery Alarm item of the Alarm
window in TOSHIBA Power Saver.
A ten-key pad is integrated into the keyboard. Refer to the
Keypad overlay section in Chapter 5, The Keyboard, for
instructions on using the keypad overlay.
Two levels of password security, supervisor and user, are
available to prevent unauthorized access to your computer.
A hotkey function blanks the screen and disables the
computer providing data security.
A microprocessor in the computer's intelligent power
supply detects the battery's charge and calculates the
remaining battery capacity. It also protects electronic
components from abnormal conditions, such as voltage
overload from an AC adaptor. You can monitor remaining
battery capacity. Use the Battery remaining item of the
Power Save Modes window in TOSHIBA Power Saver.
This feature lets you save battery power. You can specify
the Power Save Mode in the Running on batteries item of
the Power Save Modes window in TOSHIBA Power Saver.
Special features
section in Chapter 3, Getting
1-9