User's Manual
Sound system
Refer also to documentation for your audio devices.
Problem
No sound is heard
Annoying sound
is heard
TV output signal
Refer also to your Personal Conferencing Kit's documentation.
Problem
Display on TV is poor
9-22
1. Disconnect the AC adaptor and all peripheral
devices.
2. Remove the battery pack.
3. Remove the memory module.
4. Replace the battery pack and/or connect the
AC adaptor.
5. Turn on the power.
If problems persist, contact your dealer.
Procedure
Adjust the volume control dial.
Check the software volume settings.
Make sure the headphone connection is secure. If
problems persist, contact your dealer.
You may be experiencing feedback. Refer to
Using the microphone
Operating Basics.
If problems persist, contact your dealer.
Procedure
Make sure the TV type is correct for your area:
NTSC (US, JAPAN), PAL (Europe).
section in Chapter 4,