Power Indicators; Battery Indicator - Toshiba X200 Series User Manual

AC adapter Battery capacity
not connected is above low
battery trigger
point
Battery capacity
is below low
battery trigger
point
Battery capacity
exhausted
No battery
installed
* The LED is dependent on the model you purchased.

Power indicators

As shown in the above table, the Battery, DC IN and Power indicators alert
you to the computer's operating capability and battery charge status

Battery indicator

Check the Battery indicator to determine the status of the battery. The
following indicator lights indicate the battery status.
Flashing Amber
Amber
Red
No light
User's Manual
Power on
• Operates
• LED: Battery off
DC IN off
• Operates
• Alarm sounds (this
function depends on how
the computer is configured)
• LED: Battery flashes
amber
DC IN off
Computer goes into
Hibernation or shuts down
(depending on the
TOSHIBA Power Saver
setting)
• No operation
• LED: Battery off
DC IN off
The battery charge is low. The AC adapter must
be connected to recharge the battery.
Indicates the AC adapter is connected and is
charging the battery.
Indicates the AC adapter is connected and the
battery is fully charged.
Under any other conditions, the indicator does
not light.
Power and Power-Up Modes
Power off (no operation)
7-2