Table of Contents
Advertisement
User's Manual
To select a region, follow the steps below.
1. a. In Windows XP, click start, point to All Programs, point to TOSHIBA
Internal Modem and click Region Select Utility.
NOTE: Do not use the Country/Region Select function in the Modem
setup utility in the Control Panel if the function is available. If you
change the Country/Region in the Control Panel, the change may not
take effect.
b. In Windows 2000, click Start, point to Programs, point to TOSHIBA
Internal Modem and click Region Select Utility.
2. The Region Selection icon will appear in the Windows Task Bar.
Figure 4-12 The Region Selection icon (Windows XP)
Figure 4-13 The Region Selection icon (Windows 2000)
3. Click the icon with the primary mouse button to display a list of regions that
the modem supports. A sub menu for telephony location information will also
be displayed. A check will appear next to the currently selected region and
telephony location.
4. Select a region from the region menu or a telephony location from the sub-
menu.
• When you click a region it becomes the modem's region selection, and the
New Location for telephony will be set automatically.
• When you select a telephony location, the corresponding region is automati-
cally selected and it becomes the modem's current region setting.
4-24
Advertisement
Table of Contents
