Wireless Network Antenna Removal - Lexmark C540 Service Manual

Wireless network antenna removal

See "Antenna for wireless card—C544dw only" on page 7-7
1.
Remove the rear shield. See
2.
Lift to disconnect the wireless card (A) from the controller board.
3.
Carefully disconnect the antenna cable (B) from the wireless card at the card.
4.
Remove the screw (C) that secures the antenna cover (D) to the frame, and remove the antenna cover and
antenna.
"Rear shield removal" on page
for the part number.
4-11.
Repair information
5025-2xx, 4xx
4-61