12.
Remove the screw (G) above the frame.
13.
Swing the left lower frame away from the printer, and remove.
Right lower frame
1.
Open the front cover.
2.
Remove the right cover assembly. See
3.
Remove the waste toner bottle. See
4.
Remove the imaging unit. See
5.
Remove the rear shield. See
6.
Remove the rear screw (A) in the waste toner bottle sensor contact to allow access to the cable cover.
Note: The waste toner bottle sensor contact does not need to be unplugged.
"Right cover assembly removal" on page
"Waste toner bottle removal" on page
"Imaging unit (IU) removal" on page
"Rear shield removal" on page
4-10.
4-60.
4-35.
4-11.
Repair information
5025-2xx, 4xx
4-41