Autocompensator Mechanism (Acm) Removal-Standard Tray - Lexmark C540 Service Manual

Autocompensator mechanism (ACM) removal—standard tray
See "Autocompensator mechanism (ACM)—standard tray" on page 7-5
1.
Remove the toner cartridges, the waste toner bottle, and the imaging unit (IU). See
removal" on page
2.
Remove the left cover. See
3.
Remove the rear shield. See
4.
Disconnect the autocompensator mechanism (ACM) cable connector (A) from the controller board.
5.
Pull the cable (B) through the opening, and free the cables from the retainers (C) on the left side.
4-60, and see "Imaging unit (IU) removal" on page
"Left cover assembly removal" on page
"Rear shield removal" on page
for the part number.
"Waste toner bottle
4-35.
4-6.
4-11.
Repair information
5025-2xx, 4xx
4-15