Lexmark C540 Service Manual page 165

7.
Remove the exit deflector and bin full sensor flag. See
on page 4-24.
8.
Remove the bin full sensor. See
9.
Unhook the springs (D) from both sides of the fuser.
10.
Rotate the top of the fuser toward the front, slide it to the left to align the fuser side frames with the flat
areas of the shaft (E), and lift to remove the fuser.
Warning: Be careful to not interfere with or damage the fuser exit sensor to the left of the fuser when
rotating the fuser.
"Exit deflector and bin full sensor flag removal"
"Bin full sensor removal" on page
5025-2xx, 4xx
4-18.
Repair information
4-27