Fuser Drive Motor Assembly Removal - Lexmark C540 Service Manual

Fuser drive motor assembly removal

See "Fuser drive motor assembly" on page 7-5
1.
Open the front cover.
2.
Remove the right cover assembly. See
3.
Disconnect the cable (A) from the fuser drive motor assembly.
Note: If you remove the toroid (B) from the cable, be sure to return the toroid to the cable when you re-
install.
4.
Remove the two screws (C).
5.
Remove the fuser drive motor assembly.
for the part number.
"Right cover assembly removal" on page
5025-2xx, 4xx
4-10.
4-29
Repair information