Show Packet Ports; To Display The Packets Analysis For Port 7 - D-Link DES-3026 - Switch Reference Manual

show packet ports

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:

To display the packets analysis for port 7:

DES-3026:4#show packet ports 7
Command: show packet ports 7
Port number : 7
Frame Size
------------
64
65-127
128-255
256-511
512-1023
1024-1518
Unicast RX
Multicast RX
Broadcast RX 3686
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
DES-3000 Series Layer 2 Switch CLI Reference Manual
Used to display statistics about the packets sent and received by the
Switch.
show packet ports <portlist>
This command is used to display statistics about packets sent and
received by ports specified in the port list. The results are separated
into three tables, labeled A, B, and C in the window above. Table A
is relevant to the size of the packets, Table B is relevant to the type
of packets and Table C is relevant to the type of frame associated
with these packets.
<portlist> − Specifies a port or range of ports to be displayed.
None.
A
Frame Counts Frames/sec
------------ ----------
3275 10
755 10
316 1
145 0
15 0
0 0
C
152 1
557 2
16
B
Frame Type Total
---------- -------
RX Bytes 408973
RX Frames 4395
TX Bytes 7918
TX Frames 111
60
Total/sec
---------
1657
19
178
2