Config Cos Tos Value; To View The Current Cos Mapping For Static Mac Addresses - D-Link DES-3026 - Switch Reference Manual

Example usage:

To view the current CoS mapping for static MAC addresses:

DES-3026:4#show cos mac_mapping
Command: show cos mac_mapping
MAC Address
------------------------------
01-00-D6-E4-FF-05
DES-3026:4#

config cos tos value

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To map a ToS priority value 3 to a hardware queue 2 for incoming packets with ToS information:
DES-3026:4#config cos tos value 3 class 2
Command: config cos tos value 3 class 2
Success
DES-3026:4#
DES-3000 Series Layer 2 Switch CLI Reference Manual
Class
3
Used to map the Type of Service (ToS) value in the IP header of incoming packets to one
of the four hardware queues available on the switch.
config cos tos value <value 0-7> [class <class_id 0-3>]
Use this command to map ToS priority value in the IP header of an incoming packet to
one of the hardware queues on the Switch.
<value 0-7> - Specifies the ToS value in the IP header to be mapped.
class <class_id 0-3> - Specify the hardware queue to which the ToS value is mapped.
111