Forwarding Database Commands - D-Link DES-3026 - Switch Reference Manual

The layer 2 forwarding database commands in the Command Line Interface (CLI) are listed (along with the appropriate
parameters) in the following table.
Command
create fdb
create multicast_fdb
config multicast_fdb
config fdb aging_time
clear fdb
show multicast_fdb
show fdb
delete fdb
config multicast
filtering_mode
show multicast
filtering_mode
Each command is listed, in detail, in the following sections.
DES-3000 Series Layer 2 Switch CLI Reference Manual
F
ORWARDING
Parameters
<vlan_name 32> <macaddr> port <port>
<vlan_name 32> <macaddr>
<vlan_name 32><macaddr> [add | delete] <portlist>
<sec 10-1000000>
[vlan <vlan_name 32> | port <port> | all]
{vlan <vlan_name 32> | mac_address <macaddr>}
{port <port> | vlan <vlan_name 32> | mac_address <macaddr> |
static | aging_time}
<vlan_name 32> <macaddr>
[forward_unregistered_groups | filter_unregistered_groups]
D
ATABASE
81
11
C
OMMANDS