Config Address_Binding Ip_Mac Ipaddress; To Configure A Ip To Mac Address Binding Entry On The Switch - D-Link DES-3026 - Switch Reference Manual

config address_binding ip_mac ipaddress

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:

To configure a IP to MAC address binding entry on the Switch:

DES-3000 Series Layer 2 Switch CLI Reference Manual
Used to configure a previously set IP-MAC address binding entry.
config address_binding ip_mac ipaddress <ipaddr>
mac_address <macaddr> { ports [ portlist | all ] }
This command will configure an IP-MAC address binding entry.
<ipaddr> - The IP address of the device to be bound to the MAC
address stated below.
mac_address <macaddr> - The MAC address of the device to be
bound to the IP address stated above.
ports [ portlist | all ] – The port or ports bound to the IP address
and MAC address stated above.
Only administrator-level users can issue this command.
DES-3026:4#config address_binding ip_mac ipaddress
10.1.1.3 mac_address 00-00-00-00-00-05
Command: config address_binding ip_mac ipaddress
10.1.1.3 mac_address 00-00-00-00-00-05
Success.
DES-3026:4#
133