show error ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the errors of the port 3:
DES-3026:4#show error port 3
Command: show error port 3
Port number : 3
CRC Error
Undersize
Oversize
Fragment
Jabber
Drop Pkts
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
show utilization
Purpose
Syntax
Description
Parameters
Restrictions
DES-3000 Series Layer 2 Switch CLI Reference Manual
Used to display the error statistics for a range of ports.
show error ports <portlist>
This command will display all of the packet error statistics collected
and logged by the Switch for a given port list.
<portlist> − Specifies a port or range of ports to be displayed.
None.
RX Frames
---------------
0
0
0
0
0
0
Used to display real-time port utilization statistics.
show utilization [cpu | ports {<portlist>}]
This command will display the real-time port utilization statistics for
the Switch.
cpu – Entering this parameter will display the current cpu utilization
of the Switch, as a percentage.
ports <portlist> - Entering this parameter along with a list of ports
will display the current utilization of selected ports on the Switch.
None.
Excessive Deferral
CRC Error
Late Collision
Excessive Collision 0
Single Collision
Collision
61
TX Frames
----------------
0
0
0
0
0