Show 802.1P Default_Priority; To Display Current 802.1P Default Priority Configuration On The Switch - D-Link DES-3026 - Switch Reference Manual

show 802.1p default_priority

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the current 802.1p default priority configuration on the Switch:
DES-3000 Series Layer 2 Switch CLI Reference Manual
Used to display the currently configured 802.1p priority value that will
be assigned to an incoming, untagged packet before being
forwarded to its destination.
show 802.1p default_priority {<portlist>}
The show 802.1p default_priority command displays the currently
configured 802.1p priority value that will be assigned to an incoming,
untagged packet before being forwarded to its destination.
<portlist> − Specifies a port or range of ports to be viewed.
None.
DES-3026:4# show 802.1p default_priority
Command: show 802.1p default_priority
Port Priority
------- -----------
1 0
2 0
3 0
4 0
5 0
6 0
7 0
8 0
9 0
10 0
11 0
12 0
13 0
14 0
15 0
16 0
17 0
18 0
19 0
20 0
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
105