Setting The Time To Automatically Adjust; Receiving Traffic Information; Pty (Programme Type) Tuning; Receiving Traffic Information While Playing Cd Or Radio - Alpine CDA-9886R Owner’s Manual

Setting the Time to automatically Adjust

When you set to ON, the time is automatically adjusted by RDS data.
1
Press and hold F/SETUP for at least 2 seconds to
activate the SETUP mode.
2
Turn the Rotary encoder to select the Tuner mode,
and then press /ENT.
Bluetooth General
3
Turn the Rotary encoder to select Auto Clock, and
then press /ENT.
4
Turn the Rotary encoder to select ON or OFF.
5
Press and hold F/SETUP for at least 2 seconds to
return to normal mode.
• Pressing /ESC during the procedure will return to the previous
mode.
• If no operation is performed for 60 seconds in the SETUP mode, the
setting mode is cancelled.

Receiving Traffic Information

1
Press and hold BAND/TA for at least 2 seconds so
that the "TA" indicator lights up.
2
Press or to select your desired traffic
information station.
When a traffic information station is tuned in, the "TP"
indicator lights up.
Traffic information is heard only when it is being broadcast.
If traffic information is not being broadcast, the unit is set in
the standby mode. When a traffic information broadcast
begins, the unit automatically receives it and the display
shows "T. INFO".
When the traffic information broadcast is over, the unit will
automatically set in the standby mode.
• If the traffic information broadcast signal falls below a certain level,
the unit remains in the receiving mode for 1 minute. If the signal
remains below a certain level for over 1 minute, the "TA" indicator
blinks.
• If you do not want to listen to the traffic information being received,
lightly press BAND/TA to skip that traffic information message. The
TA mode will remain in the ON position to receive the next traffic
information message.
• If the volume level is changed while receiving traffic information, the
changed volume level will be memorized. When traffic information is
received next time, the volume level will be automatically adjusted to
the level memorized.
• In the TA mode, the SEEK tuning selects only the TP stations.
10
-EN
Display Tuner Bluetooth

PTY (Programme Type) Tuning

1
Press F/SETUP to activate the function mode.
2
Press 3 PTY to activate the PTY mode, while the
unit is in Radio (FM receiving) mode.
The Programme Type of the station being currently received
will be displayed for 5 seconds.
If there is no receivable PTY broadcast, "NO PTY" will be
displayed for 5 seconds.
If no RDS station can be received, the display shows "NO
PTY".
• If no operation is performed for 5 seconds after pressing 3 PTY, the
PTY mode will be automatically cancelled.
3
Press or within 5 seconds after activating
the PTY mode to choose the desired programme
type while the PTY (programme type) is being
displayed.
Each press scrolls the programme type by one.
4
Press 3 PTY within 5 seconds after selecting the
programme type to start searching for a station in
the selected programme type.
The chosen programme type display blinks during
searching and lights when a station is found.
If no PTY station is found, "NO PTY" will be displayed for 5
seconds.
5
Press F/SETUP to activate the preset mode.
• Operate the unit while the function mode is activated. If no operation
is performed for 5 seconds, the function mode is cancelled.
Receiving Traffic Information While
Playing CD or Radio
1
Press and hold BAND/TA for at least 2 seconds so
that the "TA" indicator lights up.
2
Press or to select a traffic information
station if necessary.
When a traffic information broadcast starts, the unit
automatically mutes the CD player/changer or the regular
FM broadcast.
When the traffic information broadcast finishes, the unit
automatically returns to the original source play before the
traffic information broadcast began.