Receiving Rds Regional (Local) Stations; Pi Seek Setting; Setting Pty31 (Emergency Broadcast) Reception; Setting The Time To Automatically Adjust - Alpine CDA9857 Owner's Manual

4
Make sure that the function mode returns to preset
mode, then press the preset button in which your
desired RDS station is preset.
If the preset station's signal is weak, the unit automatically
searches and tunes to a stronger station in the AF
(Alternative Frequencies) list.
5
If the preset station and the stations in the AF list
cannot be received:
When the PI SEEK setting is on (refer to "PI SEEK Setting"
on page 9), the unit searches again for a station in the PI
(Programme Identification) list.
If there are still no stations receivable in the area, the unit
displays the frequency of the preset station and the preset
no. disappears.
If the signal level of the Regional (Local) station being tuned
becomes too weak to receive, press the same preset button
to tune in a Regional station in other district.
• For presetting the RDS stations, refer to the Radio Operation section.
The RDS stations can be preset in the FM1, FM2 and FM3 bands
only.
Receiving RDS Regional (Local)
Stations
1
Press MENU to select the SETUP mode, then press
MODE.
BASS ENGINE SETUP
2
Press or to select the TUNER mode, then
press MODE.
3
Press or to select the "RDS Regional",
then press MODE.
4
Turn the Rotary encoder to select ON or OFF.
In the OFF mode, the unit automatically keeps receiving the
related local RDS station.
5
Press MENU to select RETURN.
After 2 seconds, the unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.

PI SEEK Setting

1
Press MENU to select the SETUP mode, then press
MODE.
BASS ENGINE SETUP
2
Press or to select the TUNER mode, then
press MODE.
3
Press or to select the "PI Seek", then
press MODE.
4
Turn the Rotary encoder to select ON or OFF.
5
Press MENU to select RETURN.
After 2 seconds, the unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
RETURN (OFF) BASS ENGINE
RETURN (OFF) BASS ENGINE
Setting PTY31 (Emergency Broadcast)
reception
Turn PTY31 (Emergency Broadcast) reception ON/OFF.
1
Press MENU to select SETUP mode, then press
MODE.
BASS ENGINE SETUP
2
Press or to select the TUNER mode, then
press MODE.
3
Press or to select the "Alert PTY31", then
press MODE.
4
Turn the Rotary encoder to select ON or OFF.
If you set to ON, emergency broadcasts are received
regardless of source."ALARM" is displayed during
reception.
5
Press MENU to select RETURN.
After 2 seconds, the unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
When an emergency broadcast is received, the volume
level will be automatically changed to the memorized level
in the traffic information mode.
For details, refer to "Receiving Traffic Information" on
page 10.

Setting the Time to automatically Adjust

When you set to ON, the time is automatically adjusted by RDS data.
1
Press MENU to select the SETUP mode, then press
MODE.
BASS ENGINE SETUP
2
Press or to select the TUNER mode, then
press MODE.
3
Press or to select the "Auto Clock", then
press MODE.
4
Turn the Rotary encoder to select ON or OFF.
5
Press MENU to select RETURN.
After 2 seconds, the unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
RETURN (OFF) BASS ENGINE
RETURN (OFF) BASS ENGINE
9
-EN