Cd/Mp3/Wma/Aac; Playback - Alpine CDA-9886R Owner’s Manual

CD/MP3/WMA/AAC

Rotary encoder
SOURCE/
(OPEN)
/
VIEW F/SETUP

Playback

1
Press (OPEN).
The front panel will open.
2
Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically.
Close the front panel manually.
When a disc is already inserted, press SOURCE/
switch to the DISC mode.
TUNER DISC USB
3
Bluetooth Audio* CHANGER*
1
* Displayed only when the iPod is connected and AUX+ Setup is set to
OFF, refer to "Setting the AUX+ Setup Mode" (page 21).
2
* Displayed only when the AUX+ Setup is set to ON, refer to "Setting
the AUX+ Setup Mode" (page 21).
3
* Displayed only when Bluetooth IN is set to ADAPTER, refer to
"Bluetooth Setting" (page 21).
4
* Only when the CD changer is connected.
12
-EN
/ENT
/ESC
4 5
to
1 2
iPod* /AUX+*
4
TUNER
3
While playing back MP3/WMA/AAC, press
select the desired folder.
Pressing and holding
continuously.
4
Press or to select the desired track (file).
Returning to the beginning of the current track (file):
Press .
Fast backward:
Press and hold .
Advancing to the beginning of the next track (file):
Press .
Fast forward:
Press and hold .
5
To pause playback, press
Pressing / again will resume playback.
6
After pressing (OPEN) to open the front panel,
press to eject the disc.
• Do not remove a CD during its eject cycle. Do not load more than
one disc at a time. A malfunction may result from doing either.
• If the CD does not eject, press and hold
• The CD-player can play discs containing audio data, MP3 data,
WMA data and AAC data.
• WMA format files that are protected by DRM (Digital Rights
Management), AAC format files that have been purchased from
iTunes Music Store and files that are copy-protected (copyright
protection) cannot be played back on this unit.
• The track display for MP3/WMA/AAC data playback is the file
numbers recorded on the disc.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
MP3/WMA/AAC Play Display
The folder number and file number will be displayed as
described below.
Folder number
display
Volume level
• Press VIEW to switch the display. See "Displaying the Text"
(page 19) for information about display switching.
or
or will change folders
/ .
for at least 2 seconds.
File number display
Elapsed time
to