Setting The Time To Automatically Adjust; Receiving Traffic Information; Pty (Programme Type) Tuning; Receiving Traffic Information While Playing Cd Or Radio - Alpine CDA-137BTI Owner's Manual

4
Turn the Rotary encoder to select ON or OFF.
If you set to ON, emergency broadcasts are received regardless
of source. "ALARM" is displayed during reception.
5
Press and hold SETUP for at least 2 seconds to return to
normal mode.
When an emergency broadcast is received, the volume level will
be automatically changed to the memorized level in the traffic
information mode. For details, refer to "Receiving Traffic
Information" on page 13.
Notes
• Pressing  during the procedure will return to the previous mode.
• If no operation is performed for 60 seconds in the SETUP mode, the
setting mode is cancelled.

Setting the Time to automatically Adjust

1
Press and hold SETUP for at least 2 seconds to activate the
SETUP mode.
2
Turn the Rotary encoder to select the Tuner mode, and
then press ENTER.
Bluetooth  General  Display  Tuner  USB  Bluetooth
3
Turn the Rotary encoder to select Auto Clock, and then
press ENTER.
4
Turn the Rotary encoder to select ON or OFF.
5
Press and hold SETUP for at least 2 seconds to return to
normal mode.
Notes
• Pressing  during the procedure will return to the previous mode.
• If no operation is performed for 60 seconds in the SETUP mode, the
setting mode is cancelled.

Receiving Traffic Information

1
Press and hold BANDTA for at least 2 seconds so that the
"TA" indicator lights up.
2
Press  or  to select your desired traffic information
station.
When a traffic information station is tuned in, the "TP" indicator
lights up.
Traffic information is heard only when it is being broadcast. If
traffic information is not being broadcast, the unit is set in the
standby mode. When a traffic information broadcast begins, the
unit automatically receives it and the display shows "T.INFO".
When the traffic information broadcast is over, the unit will
automatically set in the standby mode.
Notes
• If the traffic information broadcast signal falls below a certain level, the
unit remains in the receiving mode for 1 minute. If the signal remains
below a certain level for over 1 minute, the "TA" indicator blinks.
• If you do not want to listen to the traffic information being received,
lightly press BANDTA to skip that traffic information message. The TA
mode will remain in the ON position to receive the next traffic
information message.
• If the volume level is changed while receiving traffic information, the
changed volume level will be memorized. When traffic information is
received next time, the volume level will be automatically adjusted to
the level memorized.
• In the TA mode, the SEEK tuning selects only the TP stations.

PTY (Programme Type) Tuning

1
Press the Rotary encoder to activate the FUNCTION LIST
mode while the unit is in Radio (FM receiving) mode.
2
Turn the Rotary encoder to select the PTY, then press
ENTER.
AF  NEWS  PTY  FREQ Search
The Programme Type of the station being currently received will
be displayed for 5 seconds.
If there is no receivable PTY broadcast, "No PTY" will be
displayed for 5 seconds.
If no RDS station can be received, the display shows "No PTY".
3
Turn the Rotary encoder to choose the desired
programme type.
4
Press ENTER within 5 seconds after selecting the
programme type to start searching for a station in the
selected programme type.
The chosen programme type display blinks during searching
and lights when a station is found.
If no PTY station is found, "No PTY" will be displayed for
5 seconds.
5
Press and hold  for at least 2 seconds to return to
normal mode.
Receiving Traffic Information While Playing
CD or Radio
1
Press and hold BANDTA for at least 2 seconds so that the
"TA" indicator lights up.
2
Press  or  to select a traffic information station if
necessary.
When a traffic information broadcast starts, the unit
automatically mutes the CD player or the regular FM broadcast.
When the traffic information broadcast finishes, the unit
automatically returns to the original source play before the
traffic information broadcast began.
When traffic information stations cannot be received:
In the tuner mode:
When the TP signal can no longer be received for over 1 minute,
the "TA" indicator blinks.
In the CD mode:
When the TP signal can no longer be received, the traffic
information station of another frequency will be selected
automatically.
Note
• The receiver is equipped with the EON (Enhanced Other Networks)
function in order to keep track of additional alternate frequencies to
the AF list. The "EON" indicator lights up while an RDS EON station is
being received. If the station being received does not broadcast the
traffic information, the receiver automatically tunes in the related
station that broadcasts the traffic information when it occurs.
13
-EN