Table of Contents
Advertisement
Comment (6):
Popula Applications
require multiple connections. Select an application
Add (8):
Reset (9):
Current Trigger
-Port Table (10):
Delete (11):
Delete All (12):
Reset (13):
Note: Only one LAN client can use a particular special application at a time.
After you finish with all settings, please click 'Apply' (14) button and the following
message will be displayed on your web browser:
The description of this setting.
This section lists the more popular applications that (7):
from the Popular Applications selection and click 'Add' to save the
setting to 'Current Trigger-Port Table.'
Add the setting to the 'Current Trigger-Port Table.'
Click 'Reset' will clear all above setting and you can set up again.
All the settings for the special applications will be
listed here. If you want to remove some Special Application
settings from the " Current Trigger-Port Table", select the Special
Application settings you want to remove in the table and then click
"Delete Selected". If you want remove all Special Appliacation
settings from the table, just click "Delete All" button. Click "Reset"
will clear your current selections.
Please select a special application by clicking
box of the mapping, then click 'Delete Selected' button to remove
the setting. If there's no setting here, this button will be grayed
out.
Delete all settings existed in trigger port table.
Unselect all settings.
88
the 'Select'
Advertisement
Table of Contents
