Airlink101 AR580W3G User Manual page 96

Virtual Server
Table (10):
Delete (11):
Delete All (12):
Reset (13):
After you finish with all settings, please click 'Apply' (14) button and the following
message will be displayed on your web browser:
Please click 'Continue' to back to previous setup menu; to continue on other setup
procedures, or click 'Apply' to reboot the router so the settings will take effect (Please
wait for about 30 seconds while router is rebooting).
If you want to reset all settings in this page back to previously-saved value, please click
'Cancel' button.
All existing virtual server mappings will be
displayed here.
Please select a virtual server mapping by clicking
'Select' box of the mapping, then click 'Delete Selected' button to
remove the mapping. If there's no existing mapping, this button
will be grayed out.
Delete all mappings existed in virtual server table.
Unselect all mappings.
86
the