Airlink101 AR580W3G User Manual page 93

Here are descriptions of every setup items:
Enable Port Check this box to enable port mapping,
Forwarding (1): and uncheck this box to disable port mapping.
Private IP (2):
Computer Name (3): Pull down the menu and all the computers connected to the router
Type (4):
Port Range (5):
Comment (6):
Add (7):
Reset (8):
Port Forwarding All existing port forwarding mappings will
Table (9):
Delete (10):
Delete All (11):
Input the IP address of the computer on local network which
provides internet service.
will be listed here. You can easily to select the computer name
without checking the IP address of the computer.
Select the type of connection, TCP or UDP. If you're not sure,
please select 'Both'.
Input the starting port number in the left field, and input the ending
port number in the right field. If you only want to redirect a single
port number, just fill the port number in the left field.
Please input any text to describe this mapping, up to 16
alphanumerical characters.
Add the mapping to port forwarding table.
Remove all inputted values.
be displayed here.
Please select a port forwarding mapping by
'Select' box of the mapping, then click 'Delete Selected' button to
remove the mapping. If there's no existing mapping, this button
will be grayed out.
Delete all mappings existed in virtual server table.
83
clicking the