Airlink101 AR580W3G User Manual page 83

Wireless n 150 3g/3.5g travel router

Table of Contents

This wireless router supports two types of WPS: Push-Button Configuration (PBC), and

PIN code. If you want to use PBC, you have to push a specific button on the wireless

client to start WPS mode, and switch this wireless router to WPS mode too. You can

push Reset/WPS button of this wireless router, or click 'Start PBC' button in the web

configuration interface to do this; if you want to use PIN code, you have to know the PIN

code of wireless client and switch it to WPS mode, then provide the PIN code of the

wireless client you wish to connect to this wireless router. The detailed instructions are

listed follow:

Please click 'Wireless' menu on the left of web management interface, then click 'WPS',

and the following message will be displayed on your web browser:

Here are descriptions of every setup items:

Enable WPS (1):

Wi-Fi Protected

Setup Information here:

(2):

Check this box to enable WPS function, uncheck it to disable

WPS.

WPS-related system information will be displayed

WPS Status: If the wireless security (encryption) function of this

Table of Contents