Airlink101 AR580W3G User Manual page 105

IP Filtering All existing IP addresses in filtering table will be
Table (12):
Add PC (13):
Delete
Selected (14):
Delete All (15):
After you finish with all settings, please click 'Apply' (16) button and the following
message will be displayed on your web browser:
Please click 'Continue' to back to previous setup menu; to continue on other setup
procedures, or click 'Apply' to reboot the router so the settings will take effect (Please
wait for about 30 seconds while router is rebooting).
If you want to reset all settings in this page back to previously-saved value, please click
'Cancel' button.
addresses listed in filtering table will be denied from connecting to
the network; if you select allow, only IP addresses listed in filtering
table will be able to connect to the network, and rejecting all other
network devices.
listed here.
Click this button to add a new IP address to IP filtering table, up to
20 IP addresses can be added.
Please refer to section 3-3-1-1 'Add PC' below.
If you want to delete a specific IP address entry,
check the 'select' box of the IP address you want to delete, then
click 'Delete Selected' button. (You can select more than one IP
addresses).
If you want to delete all IP addresses listed here, please click
'Delete All' button.
95