Please follow the following instructions to set wired LAN parameters:
Please click 'LAN' menu on the left of web management interface, there are three setup
groups here: 'LAN IP', 'DHCP Server', and 'Static DHCP Leases Table'. Here are setup
instructions for each of them:
2-7-1 LAN IP section:
Here are descriptions of every setup items:
IP address (1):
Subnet Mask (2):
802.1d
Spanning Tree (3):
DHCP Server (4):
Recommended Value if you don't know what to fill:
IP Address: 192.168.2.1
Subnet Mask: 255.255.255.0
802.1d Spanning Tree: Disabled
DHCP Server: Enabled
Please input the IP address of this router.
Please input subnet mask for this network.
If you wish to activate 802.1d spanning tree
function, select 'Enabled' for setup item '802.1d Spanning Tree',
or set it to 'Disabled'
If you want to activate DHCP server function of this router, select
'Enabled', or set it to 'Disabled'.
53
1
2
3
4