Airlink101 AR580W3G User Manual page 27

If you want to go back to previous step, please press 'Back' button on the bottom of this
page.
NOTE: Some service providers use 'DHCP' (Dynamic Host
Configuration Protocol) to assign IP address to you. In this case, you
can choose 'Cable Modem' as Internet connection type, even you're
using another connection type, like xDSL. Also, some cable modem
uses PPPoE, so you can choose 'PPPoE xDSL' for such cable modem
connection, even you're using a cable modem.
3. Basic Setting
Here are descriptions of every setup items:
Wireless Module (1): Display the Wireless Module: Enable (default).
Band (2):
1
Please select a Band type from the dropdown list of 'Band', It
allows you to set the AP fix at 802.11b or 802.11g or 802.11n
mode. You also can select B+G or B+G+N mode to allow the AP
select 802.11b, 802.11g and 802.11n connection automatically.
2
3
4
5
17
6