Airlink101 AR580W3G User Manual page 104

Client PC
MAC address (2):
Computer Name (3): Pull down the menu and all the computers connected to the router
Comment (4):
Add (5):
Reset (6):
MAC Filtering
Table (7):
Delete (8):
Delete All (9):
Reset (10):
Enable IP
Filtering Table (11): filtering, and please select 'Deny' or 'Allow'
Please input the MAC address of computer
or network device here, dash ( - ) or colon ( : ) are not required.
(i.e. If the MAC address label of your wireless device indicates
'aa-bb-cc-dd-ee-ff' or 'aa:bb:cc:dd:ee:ff', just input 'aabbccddeeff'
will be listed here. You can easily to select the computer name
without checking the IP address of the computer.
You can input any text here as the comment of this MAC address,
like 'ROOM 2A Computer' or anything. You can input up to 16
alphanumerical characters here. This is optional and you can
leave it blank, however, it's recommended to use this field to write
a comment for every MAC addresses as a memory aid.
Click 'Add' button to add the MAC address and associated
comment to the MAC address filtering table.
Remove all inputted values.
All existing MAC addresses in filtering table
will be listed here.
If you want to delete a specific MAC address entry, check the
'select' box of the MAC address you want to delete, then click
'Delete Selected' button. (You can select more than one MAC
addresses).
If you want to delete all MAC addresses listed here, please click
'Delete All' button.
You can also click 'Reset' button to unselect all MAC addresses.
Check this box to enable IP address based
to decide the behavior of IP filtering table. If you select deny, all IP
94