Ide Configuration - Asus TS300-E5 - 0 MB RAM User Manual

PIO Mode [Auto]
Selects the PIO mode.
Configuration options: [Auto] [0] [1] [2] [3] [4]
DMA Mode [Auto]
Selects the DMA mode.
Configuration options: [Auto] [SWDMA0~2] [MWDMA0~2] [UDMA0~6]
SMART Monitoring [Auto]
Sets the Smart Monitoring, Analysis, and Reporting Technology. Configuration
options: [Auto] [Disabled] [Enabled]
32Bit Data Transfer [Enabled]
Enables or disables 32-bit data transfer.
Configuration options: [Disabled] [Enabled]
5.3.5 IDE Configuration
The items in this menu allow you to set or change the configurations for the IDE
devices installed in the system. Select an item then press <Enter> if you wish to
configure the item.
Main
IDE Configuration
ATA/IDE Configuration
Configure SATA as
Hard Disk Write Protect
IDE Detect Time Out (Sec)
ATA(PI) 80Pin Cable Detection [ Host]
v02.58 (C)Copyright 1985-2007, American Megatrends, Inc.
ATA/IDE Configuration [Enhanced]
Disables or allows selection of the IDE operation mode depending on the operating
system (OS) that you installed. Set to [Enhanced Mode] if you are using native
OS, such as Windows
legacy OS, such as Windows
Configuration options: [Disabled] [Compatible Mode] [Enhanced Mode]
ASUS TS300-E5
BIOS SETUP UTILITY
[Enhanced]
[IDE]
[Disabled]
[35]
2000/XP/Vista. Set to [Compatible Mode] if you are using
®
ME/98/NT and MS-DOS.
®
Options
Disable
Compatible
Enabled
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
5-13