Table of Contents
Advertisement
2.
RAID controller selection (3-pin RAID_SEL1)
This jumper allows you to select the RAID configuration utility to use when you
create disk arrays. Place the jumper caps over pins 1-2 if you want to use the LSI
Logic Embedded SATA RAID Setup Utility (default); otherwise, place the
jumper caps to pins 2-3 to use the Intel
®
P5BP-E/4L
P5BP-E/4L RAID_SEL1 Setting
3.
Force BIOS recovery setting (3-pin RECOVERY1)
This jumper allows you to quickly update or recover the BIOS when it gets
corrupted.
To update the BIOS:
1.
Prepare a floppy disk that contains the latest BIOS for the motherboard
(xxxx-xxx.ROM) and the AFUDOS.EXE utility.
2.
Set the jumper to pins 2-3.
3.
Insert the floppy disk then turn on the system to update the BIOS.
4.
Shut down the system.
5.
Set the jumper back to pins 1-2.
6.
Turn on the system.
®
P5BP-E/4L
P5BP-E/4L BIOS Recovery Setting
ASUS TS300-E5
Matrix Storage Manager.
®
RAID_SEL1
1 2
2 3
LSI RAID ROM
INTEL RAID ROM
(Default)
RECOVERY1
1
2
Normal
BIOS recovery
(Default)
2 3
4-5
Advertisement
Table of Contents
