Table of Contents
Advertisement
To an existing Windows
To install the RAID controller driver on an existing Windows
After installing the FastTrak TX Series RAID Controller card and rebooting
your system, Windows Server setup will show a "Found New Hardware"
dialog box. Under Windows, "RAID Controller" will be displayed.
1.
Insert the FastTrak driver diskette into the A:\ drive.
2.
Choose Install the software automatically and press the Enter key.
3.
Choose Promise FastTrak TX [4650, 2650] (tm) Controller from the
list that appears on screen, and then press the Enter key.
4.
If using a driver that has not been digitally signed by Microsoft, you
will be asked if you want to continue the installation. Click Continue
anyway.
5.
When the New Hardware Wizard has finished installing the FastTrak
driver, click Finish.
Confirming Driver Installation
1.
Right-click the My Computer icon and choose Manage from the popup
menu.
2.
From the left panel, choose Device Manager.
3.
Click the "+" in front of SCSI and RAID controllers. "Promise FastTrak
TX [4650, 2650] (tm) Controller" and "Promise Raid Console" should
appear.
ASUS TS300-E5
Server
®
Server:
®
7-17
Advertisement
Table of Contents
