3.
When prompted, use the arrow keys to select Yes from the Consistency
Check dialog box, then press <Enter>. You may also press <F10> to check
the drive consistency.
A progress bar appears on screen.
4.
While checking the disk consistency, press <Esc> to display the following
options.
•
Stop: Stops the consistency check. The utility stores the percentage
of disk checked, When you restart checking, it continues from the last
percentage completed rather than from zero percent.
Continue: Continues the consistency check.
•
•
Abort: Aborts the consistency check. When you restart checking, it
continues from zero percent.
5.
When checking is complete, press any key to continue.
6-26
Chapter 6: RAID configuration