6.2.8
Selecting the boot drive from a RAID set
You must have created a new RAID configuration before you can select the boot
drive from a RAID set. Refer to the Creating a RAID set: Using New Configuration
section for details.
To select the boot drive from a RAID set:
1.
From the Management Menu, select Configure > Select Boot Drive, then
press <Enter>.
2.
When prompted, use the arrow keys to select the bootable logical drive from
the list, then press <Enter>.
3.
The logical drive is selected as boot drive. Press any key to continue.
ASUS TS300-E5
6-29