Table of Contents
Advertisement
Select RAID from the Logical Drive menu, then press <Enter>.
6.
7.
Select the RAID level from the menu, then press <Enter>.
You need at least two identical hard disk drives when creating a RAID 1 set.
8.
When creating a RAID 1 set, select DWC from the Logical Drive menu, then
press <Enter>.
When creating a RAID 0 set, proceed to step 10.
9.
Select On to enable the Disk Write Cache setting, then press <Enter>.
Enabling DWC can improve the performance, but with the risk of data loss.
6-8
Chapter 6: RAID configuration
Advertisement
Table of Contents
