Creating A Raid 0 Set (Stripe) - Asus P5BV-C - Motherboard - ATX User Manual

5.3.1

Creating a RAID 0 set (stripe)

To create a RAID 0 set:
From the utility main menu, select 1. Create RAID Volume, then press
1.
<Enter>. This screen appears.
Intel(R) Matrix Storage Manager Option ROM v5.0.0.1032 ICH7R wRAID5
Copyright(C) 2003-05 Intel Corporation. All Rights Reserved.
Enter a string between 1 and 16 characters in length that can be used
to uniquely identify the RAID volume. This name is case sensitive and
[↑↓]-Change [TAB]-Next [ESC]-Previous Menu [Enter]-Select
2. Enter a name for the RAID 0 set, then press <Enter>.
When the RAID Level item is highlighted, press the up/down arrow key to
3.
select RAID 0(Stripe), then press <Enter>.
When the Disks item is highlighted, press <Enter> to select the hard disk
4.
drives to configure as RAID. This SELECT DISKS screen appears.
Port Drive Model Serial # Size Status
0 XXXXXXXXXXXX XXXXXXXX XX.XGB Non-RAID Disk
1 XXXXXXXXXXXX XXXXXXXX XX.XGB Non-RAID Disk
2 XXXXXXXXXXXX XXXXXXXX XX.XGB Non-RAID Disk
3 XXXXXXXXXXXX XXXXXXXX XX.XGB Non-RAID Disk
Select 2 to 4 disks to use in creating the volume.
[↑↓]-Previous/Next [SPACE]-Selects [ENTER]-Selection Complete
5. Use the up/down arrow key to highlight a drive, then press <Space> to
select. A small triangle marks the selected drive. Press <Enter> after
completing your selection.
ASUS P5BV-C Series
[ CREATE ARRAY MENU
Name: Volume0
RAID Level: RAID0(Stripe)
Disks: Select Disks
Strip Size: 128KB
Capacity: 0.0 GB
Create Volume
[ DISK/VOLUME INFORMATION
cannot contain special characters.
[ SELECT DISKS
]
]
]
5-7