Creating A Raid 0 Set (Stripe) - Asus P5BV-M User Manual

5.3.1. Creating.a.RAID.0.set.(stripe)
To create a RAID 0 set:
From the utility main menu, select 1..Create.RAID.Volume, then press <Enter>.
1.
This screen appears.
Intel(R) Matrix Storage Manager Option ROM v5.0.0.1032 ICH7R wRAID5
Copyright(C) 2003-05 Intel Corporation. All Rights Reserved.
Enter a string between 1 and 16 characters in length that can be used
to uniquely identify the RAID volume. This name is case sensitive and
[↑↓]-Change [TAB]-Next [ESC]-Previous Menu [Enter]-Select
2. Enter a name for the RAID 0 set, then press <Enter>.
When the RAID.Level.item is highlighted, press the up/down arrow key to select
3.
RAID.0(Stripe), then press <Enter>.
When the Disks item is highlighted, press <Enter> to select the hard disk drives
4.
to configure as RAID. This SELECT.DISKS screen appears.
Port Drive Model Serial # Size Status
0 XXXXXXXXXXXX
1 XXXXXXXXXXXX
2 XXXXXXXXXXXX
3 XXXXXXXXXXXX
[↑↓]-Previous/Next [SPACE]-Selects [ENTER]-Selection Complete
5. Use the up/down arrow key to highlight a drive, then press <Space> to select.
A small triangle marks the selected drive. Press <Enter> after completing your
selection.
ASUS P5BV-M
[ CREATE ARRAY MENU
Name: Volume0
RAID Level: RAID0(Stripe)
Disks: Select Disks
Strip Size: 128KB
Capacity: 0.0
Create Volume
[ DISK/VOLUME INFORMATION
cannot contain special characters.
[ SELECT DISKS
XXXXXXXX
XXXXXXXX
XXXXXXXX
XXXXXXXX
Select 2 to 4 disks to use in creating the volume.
]
GB
]
]
XX.XGB Non-RAID Disk
XX.XGB Non-RAID Disk
XX.XGB Non-RAID Disk
XX.XGB Non-RAID Disk
5-31