Asus P5BV-C - Motherboard - ATX User Manual page 40

2. RAID controller selection (3-pin RAID_SEL1)
This jumper allows you to select the RAID configuration utility to use when you
create disk arrays. Place the jumper caps over pins 1-2 if you want to use the LSI
Logic Embedded SATA RAID Setup Utility (default). Otherwise, place the
jumper caps to pins 2-3 to use the Intel
P5BV-C/4L
P5BV-C/4L RAID_SEL1 Setting
3. Force BIOS recovery setting (3-pin RECOVERY1)
This jumper allows you to quickly update or recover the BIOS when it gets
corrupted.
To update the BIOS:
1. Prepare a floppy disk that contains the latest BIOS for the motherboard
(xxxx-xxx.ROM) and the AFUDOS.EXE utility.
2. Set the jumper to pins 2-3.
3. Insert the floppy disk then turn on the system to update the BIOS.
4. Shut down the system.
5. Set the jumper back to pins 1-2.
6. Turn on the system.
P5BV-C/4L
P5BV-C/4L BIOS Recovery Setting
2-20
®
®
Matrix Storage Manager.
®
RAID_SEL1
1 2 2 3
LSI RAID ROM INTEL RAID ROM
(Default)
RECOVERY1
1 2 2 3
Normal BIOS recovery
(Default)
Chapter 2: Hardware information