Table of Contents
Advertisement
6.
Use the up/down arrow key to select the stripe size for the RAID 0 array, then
press <Enter>. The available stripe size values range from 8 KB to 128 KB.
The default stripe size is 128 KB.
TIP: We recommend a lower stripe size for server systems, and a higher stripe
size for multimedia computer systems used mainly for audio and video editing.
7.
Key in the RAID volume capacity that you want, then press <Enter>. The
default value indicates the maximum allowed capacity.
8.
Press <Enter> when the Create Volume item is highlighted. This warning
message appears.
9.
Press <Y> to create the RAID volume and return to the main menu, or <N> to
go back to the Create Volume menu.
5-8
WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.
Are you sure you want to create this volume? (Y/N):
Chapter 5: Driver installation
Hide quick links:
Advertisement
Table of Contents
