Windows 2000 Or Windows Xp (Lan Driver) - D-Link DSL-200 - 8 Mbps DSL Modem User Manual

Windows 2000 or Windows XP (LAN Driver)

1. Double-click on the My Computer icon, then the Control Panel icon, and then the
Network and Dial-up Connections icon.
2. The Network and Dial-up Connections window appears. Right click on the Local Area
Connection for the D-Link DSL-200 USB ADSL Modem.
3. The Local Area Connection window appears. Click on Internet Protocol (TCP/IP), then
click on Properties.
4. The Internet Protocol (TCP/IP) window appears. Under the General tab, select Use the
following IP address. Enter the IP address, Subnet Mask, and Default Gateway given
to you by your ISP or ADSL service provider. Click OK.
5. The General tab will again appear. Click OK.
6. The Network and Dial-up Connection window appears. Close this window to
complete the connection.