D-Link DSL-200 - 8 Mbps DSL Modem User Manual page 11

User guide
Table of Contents

Advertisement

Use the tables provided here to record the information you need to install the Modem.
VPI:
Software Driver:
The driver used depends on the connection protocol used for your network services.
Ø Select the WAN driver if your connection is a PPP connection. That is if you
are using RFC 2364 PPP over ATM or RFC 2516 PPPoE PPP over Ethernet.
Ø Select the LAN driver if you are using RFC 2684 Ethernet over ATM.
Encapsulation Method:
WAN Driver:
RFC 2364 PPPoATM NULL Encapsulation
RFC 2364 PPPoATM LLC Encapsulation
RFC 2516 PPPoE Encapsulation
LAN Driver:
RFC 2684 IPoATM Bridged LLC Encapsulation
RFC 2684 IPoATM Bridged VC Encapsulation
RFC 2684 IPoATM Routed LLC Encapsulation
RFC 2684 IPoATM Routed VC Encapsulation
Modulation Method:
T1.413
Multimode
G.Lite
G.DMT
ACCOUNT INFORMATION (WAN driver users only)
User Name:
Password:
IP Address:
Subnet Mask:
Gateway:
DNS Host Name:
DNS Domain:
DNS Server:
SETTINGS TABLE (all users)
(choose one)
(choose one)
IP CONFIGURATION (LAN driver only)
VCI:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dsl-200

Table of Contents