Download Print this page
D-Link DSL-200 Quick Installation Manual

D-Link DSL-200 Quick Installation Manual

Hide thumbs Also See for DSL-200:

Advertisement

Quick Links

Before Your Begin
This Quick Installation Guide gives step-by-step instructions for setting up the D-
Link DSL-200 ADSL Modem. The model you have purchased may appear slightly
different from those shown in the illustrations. For more detailed information about
the ADSL Modem, its components, making network connections and technical
specifications, please refer to the User's Manual included with your ADSL Modem.
Check Your Package Contents
These are the items included with your DSL-200 purchase:
If any of the above items are missing, please contact your reseller.
©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are
the property of their respective holders. Software and specifications subject to change
• DSL-200 ADSM Modem (USB interface)
• CD ROM include Driver and User's Guide
• Quick Installation Guide
•USB Cable
•RJ-11 Cable
without notice.
1
DSL-200
D-Link USB
ADSL Modem

Advertisement

loading

Summary of Contents for D-Link DSL-200

  • Page 1 Before Your Begin This Quick Installation Guide gives step-by-step instructions for setting up the D- Link DSL-200 ADSL Modem. The model you have purchased may appear slightly different from those shown in the illustrations. For more detailed information about the ADSL Modem, its components, making network connections and technical specifications, please refer to the User’s Manual included with your ADSL Modem.
  • Page 2 You need to install the device drivers first and then perform the hardware installation steps below. 1. Insert the DSL-200 Installation CD into the CD-ROM drive. To view the contents of the CD, open CD ROM from the desktop. Select the folders “...
  • Page 3 4. The “License Agreement” screen will appear. Click Accept. 5. When all necessary files have been copied, the “Finished” screen will appear. Click Finish. MAC OSX 10.x operating systems will request restart. MAC 9.x does not require a restart The USB driver is now installed. Before using your USB ADSL modem, connect the modem to the computer using the proper USB device cable and connect the DSL line to the USB ADSL modem.