Table of Contents
Advertisement
If your ADSL connection uses either the RFC 2684 or the RFC 1577 protocol, you must set
your own TCP/IP configuration. The following information will be provided to you by your
DSL service provider:
ü IP Address
ü Subnet Mask
ü Gateway
ü DNS Host Name
ü DNS Domain
ü DNS Server
Windows 98 or Windows Me (LAN Driver)
Follow these steps if you are using the RFC 2684 or RFC 1577 protocol on a computer
running Windows 98 or Windows Me.
1. From the Start menu, select Settings, Control Panel, and then double-click on the
Network icon.
2. The Network window appears. Select the Configuration tab, scroll down the
installed network components list and click on TCP/IPà D-Link DSL-200 USB
ADSL Modem
3. Click the Properties button.
4. The TCP/IP Properties window will appear. Select the IP Address tab and then
select the Select an IP address option. Enter the IP Address and Subnet Mask
settings given to you by your ISP or ADSL service provider.
5. Select the Gateway tab and enter the IP settings in the New gateway field. Click Add.
Select the DNS Configuration tab. Select the Enable DNS option.
Type in your host name in the Host: field.
Type in your domain name in the Domain: field.
Enter the DNS settings in the DNS Server Search Order field and click Add. If you have
more than one DNS IP address, repeat this step. You can have up to 3 DNS servers listed
here.
After all the TCP/IP information has been entered, click OK.
The Network window again appears, click OK.
The System Settings Change window appears. You need to restart your computer for
the changes to go into effect. Click Yes.
Connect to Internet - LAN Driver Users
Advertisement
Table of Contents
