Advertisement
CAPI Mode
Installing RVS-COM Lite
Make sure the RVS-COM Lite "CommCenter" has been executed before start
any application in CAPI mode. For details, refer to the previous section with
the same title in the Windows 95/98 environment.
Applications
All the applications applied in Windows NT can be executed as in Windows
95/98. For better illustrations, refer to the previous sections with the same
titles.
Making PPP connections
1.
Run RVS-COM "CommCenter".
2.
Enter "Control Panel"
3.
Select "Don't detect my modem; I will select it from a list". Click
"Next".
4.
Select "RVS Datentechnik" – "RVS ISDN Internet PPP". Click
"Next".
5.
Select the COM port that is identical to the COM port assignment in
"Windows Port". Click "Next".
6.
Click "Finish".
7.
Now you will see "RVS ISDN Internet PPP" in the modem properties
list.
8.
Click "Close".
9.
Click "Yes", when "Modem Setup" window pops-up.
10. Click "Add" in "Remote Access Setup" dialog window.
11. Select "COM# RVS ISDN Internet PPP" in RAS device list. Click
"OK".
12. Click "Continue". Then, re-start Windows NT.
13. Run RVS-COM "CommCenter".
14. Double click "Dial-Up Networking" in "My Computer".
15. If you are not new of using Dial-up Networking, click "New" command
button. If this is your first connection, just skip it. Give a name for the
new connection. For example, "RVS_PPP". Click "Next".
16. Select "Send my plain text password..." (recommended). Click "Next".
17. Select "RVS ISDN Internet PPP (COM#)". Click " Next".
18. Give the phone number that you want to dial to. Click "Next".
19. Click "Finish".
"Modems". Click "Add" button.
- 43 -
Advertisement
