Advertisement
3.
Double-click "Make New Connection".
4.
Name the new connection appropriately. For example, "RVS_V.110".
5.
Select "RVS ISDN V.110" in "Select a device" box.
6.
Click "Configure" button, and specify the V.110 user rate in "Maximum
speed" box. Click "Next".
Maximum speed=1200
Maximum speed=2400
Maximum speed=4800
Maximum speed=9600
Maximum speed=19200 V.110 user rate = 19200 bps.
Maximum speed=38400 V.110 user rate = 38400 bps.
Maximum speed=57600 V.110 user rate = 57600 bps*
If the maximum speed you selected is not in the above list, the
system will automatically adapt the V.110 user rate to the
default setting at 38400 bps.
7.
Enter the ISDN phone number of the remote party that you want to call.
8.
Click "Next", and click "Finish" to complete the setting.
Making V.120 Connections
1.
Execute "CommCenter". And make sure all the settings are well and
correctly configured.
2.
Double-click "Make New Connection".
3.
Name the new connection appropriately. For example, "V.120".
4.
Select "RVS ISDN V.120" in the "Select a device" box.
5.
Click "Configure" button, and give the appropriate settings. Ignore the
"Maximum speed" setting (you are recommended to set to the speed at
higher than 64000 bps, such as 115200 or higher). Click "Next".
6.
Click "Next".
7.
Enter the ISDN phone number of the remote party that you want to call.
8.
Click "Next", and click "Finish" to complete the setting.
Making X.75 Connections
1.
Execute "CommCenter". And make sure all the settings in the tab are
well and correctly configured.
2.
Enter "Control Panel"
transparent". Click "Proprieties" button. Make sure the COM port
setting is correctly assigned.
3.
Run Windows 95 "Hypertrm". Name the new connection appropriately.
For example, "RVS_X75". Click "OK".
4.
Enter the ISDN phone number that you want to connect to.
V.110 user rate = 1200 bps.
V.110 user rate = 2400 bps.
V.110 user rate = 4800 bps.
V.110 user rate = 9600 bps.
* Available only for Japan
"Modems". Select "RVS ISDN X.75
- 22 -
Advertisement
