Advertisement
2.
ISDN Phone (acts like a telephone set, that you can communicate with the
remote parties over ISDN line)
To fully use the voice applications, especially the ISDN Phone service, a full-
duplex audio device (sound card) is required. Full-duplex means, that your
audio device can handle incoming and outgoing sound signals simultaneously
(i.e. you can listen and talk at the same time). If you do not have full-duplex,
then you can only hear from the caller. However, this will still let you run the
answering machine function.
Digital Answering Machine
1.
Start RVSCommCenter.
2.
Open the Service tab. Check Accept calls. Check Answerphone.
3.
Open the ISDN tab, select the appropriate ISDN voice coding scheme for
your location. A-law is usually used in European countries, and Mu-law
for North America.
4.
Make sure all the other settings in "RVS CommCenter" are correctly
configured. Click Ok.
5.
Run "Config" in "Configuration Utility".
6.
Open "Switch type". Choose appropriate "Voice Encoding" scheme. The
setting should be consistent with RVS-COM in step (3). Perform the
following steps to record
Voice recording
1.
Start Telephone in RVS-COM program group. Click the Answerphone
function bar to toggle to the ON state. (for the OFF state is for ISDN
Phone utility.)
- 30 -
Advertisement
