Advertisement
3.
Name the new connection appropriately.
4.
Select Intelligent ISDN MODEM (modem).
5.
Enter in the area code and phone number of your Internet Service Provider
(ISP). Leave out the '-'. (Example: '1234567' NOT '123-4567' )
Typically, the country and area codes are not required and should be
disabled.
6.
From the Dial-Up Networking window right-click your newly created
connection. Select Properties. On the General tab, cancel the selection
of "Use area code and Dialing Properties" and click OK.
7.
From the Start menu, select Programs. Select Configuration Utility.
Click Config. A dialogue box will prompt you to change the settings to
fit your needs.
- 9 -
Advertisement
