5.
If you are using disks to install the device driver, insert the disk into your
free floppy drive and type in the drive name, for example, A:, to continue.
Or if you are using compact disk to install, insert the compact disk into
your computer and type in the CD-ROM drive letter followed by
winnt\driver, and click OK to continue.
6.
When the Select OEM Option dialog box appear, click OK to continue.
7.
The following dialog box will prompt you to change the I/O and IRQ
settings. You may refer to the Hardware Detection to know the available
addresses to avoid any conflicts with your system. (Go to the Start menu.
Click Programs. Select Configuration Utility. Open Hardware
Detection.)
8.
Press OK to continue. The installation program will proceed
automatically.
9.
When finished, a Setup Message will prompt you to invoke Remote
Access Services (RAS) setup. Press OK to continue.
- 38 -