HP 445860-B21 - 10Gb Ethernet BL-c Switch Reference Manual page 147

Table 96 Switch Management Processor Configuration (Basic) controls
Control
Telnet Access
Telnet Port (1-65535)
TFTP Port (1-65535)
Idle Timeout (1-60)
Timezone Location
Enable/Disable Daylight Savings Time
Description
Enables or disables Telnet access to the switch.
To activate this control, you must enable BBI configuration of Telnet from
the CLI (/cfg/sys/access/tsbbi).
Sets an optional telnet server port number for cases where the server listens
for telnet sessions on a non-standard port. The default is 23.
Sets an optional TFTP server port number for cases where the server listens
for TFTP sessions on a non-standard port. The default is 69.
Sets the idle timeout for CLI sessions, from 1 to 60 minutes. The default is 5
minutes.
Configures the time zone where the switch resides. You are prompted to
select your location (continent, country, region) by the timezone wizard.
Once a region is selected, the switch updates the time to reflect local
changes to Daylight Savings Time, etc.
Enables or disables Daylight Savings Time in the system clock. When
enabled, the switch adds an extra hour to the system clock so that it is
consistent with the local clock. The default setting is disabled.
Configuring the switch
147