Adjusting The Clock; Adjusting The Pressure - A&D UA-1020 Instruction Manual

The UA-1020 blood pressure monitor has a built-in clock that gives you the time
and date and can tell you when a blood pressure reading stored in memory was
taken. We recommend that you adjust the clock prior to use. To adjust the clock,
follow these simple steps:
1. Press the clock button
2. Use the arrow
3. After reaching the desired year, press the clock button
4. Repeat the process for the month, day and hour.
5. The next setting will be for pressure.
1. After setting the year, month, day and hour, the next mode is the pressure
setting.
2. Default is
3. For even more rapid readings, you can adjust the default to about 30 mmHg
or more above your expected systolic pressure.
4. Use the arrow
5. After reaching the desired pressure, press the clock button
6. The next setting will be for TriCheck
In Canada - Auto Control Medical (Toll-Free): 1-800-461-0991
located to the right of the display.
buttons to set the year.
, which stands for automatic.
buttons to set the pressure.

ADJUSTING THE CLOCK

ADJUSTING THE PRESSURE

™
Mode.
again.
again.
E-10